Jump to content

1 Screenshot

About This File

Here is Beta Firmware to upgrade your ATV 585/600 to Android 5.1

You can install this normally using an SD Card or USB drive and the pre-installed upgrade app.

This does not require the reset button like before, however, if you would like to you can load this through the Recovery Menu as well.

Just extract the IMG file from the zip folder and move it to a USB drive or SD Card that is formatted to FAT32.

**PLEASE NOTE THIS WILL FACTORY RESET YOUR DEVICE**

- This is our MyGica version of Android 5.1 and not Android Stock version like we offered before. 
This has been worked on for awhile now.

Change Logs:

1. Updated to KODI 17.3
2. Updated Google Play Services
3. Faster Performance 
4. Fixed Mac Address changing 
5. Turned off click sounds when browsing through the Home Screen + Android Settings
6. Fixed Screensaver issue when watching a video
7. Improved video playback
8. Improved standby issues as best we could. There is not much more we can do about this issue.

 

-----------------------------------------

 Mygica is not responsible for damage to the unit outside of the 1 year warranty period.

----------------------------------------




User Feedback

Recommended Comments



On 5/7/2017 at 1:37 PM, Justin said:

What are the problems exactly?

The disconnection of  the wifi for no reason.

And I don't have a connection problem with the others devices. 

Share this comment


Link to comment
Share on other sites

Hi i update my divice 586 dtv with this firmware to have android 5.1 but when this finish i cant see who dtv is working. I cant see any digital tv channel! Can you please help me? The 4.4 have a lot of problems and i want to use this new ones

Share this comment


Link to comment
Share on other sites
17 hours ago, Parreiradiego said:

Hi i update my divice 586 dtv with this firmware to have android 5.1 but when this finish i cant see who dtv is working. I cant see any digital tv channel! Can you please help me? The 4.4 have a lot of problems and i want to use this new ones

This version of 5.1 does not have support for the DTV player, that is why you cannot see it when you install it onto your 586

Share this comment


Link to comment
Share on other sites
Just now, Justin said:

This version of 5.1 does not have support for the DTV player, that is why you cannot see it when you install it onto your 586

any help about the wifi problem? I have the same device.

Share this comment


Link to comment
Share on other sites
Just now, Diegote said:

Yes, same problem.

The 586 uses a different Wifi Module then the 585/600, so that must be the issue.

Will have to see if this can be fixed or not.

Share this comment


Link to comment
Share on other sites
On 17/7/2017 at 0:37 PM, Justin said:

This version of 5.1 does not have support for the DTV player, that is why you cannot see it when you install it onto your 586

  Are you going to genere a version for dtv or i need to downgrade  to 4.4 version ?

Share this comment


Link to comment
Share on other sites
18 hours ago, Parreiradiego said:

  Are you going to genere a version for dtv or i need to downgrade  to 4.4 version ?

same question but for the wifi, and if I downgrade to 4.4 version netflix doesn't show the subtitles.

Share this comment


Link to comment
Share on other sites
8 hours ago, Parreiradiego said:

Any news? When you think we're going to have it?

If you are referring to 586 Android 5.1 Firmware with DTV Player
I  do not know at this time.

Share this comment


Link to comment
Share on other sites

I updated my Mygica ATV 585 today to this latest 5..1.1 update. Some hiccups during installation, but all seems to be working well. Boot up is slow, so some patience is required. On the Android side,  it automatically configures my TV resolution to 1920 x 1080. However, when running Kodi, System settings for the video display is greyed out and set to 1280 x 720. I am unable to change this resolution setting. Incidentally, Kodi was updated to Kodi 17.4. Could it be the reason is due to Kodi 17.4 or is there a way to allow resolution changes?

Share this comment


Link to comment
Share on other sites
On 7/6/2017 at 4:27 AM, starterman said:

I'm wondering if anyone else has problems of having to reset the clock ?

Yes, most annoying. Sometimes auto clock works. Other times you have to do it manually.

Share this comment


Link to comment
Share on other sites
On 9/16/2017 at 11:19 PM, Memphisfaith said:

Argh! I have the 600 and I don't even have a pinhole to reset. 

This is such a pain!

The pin hole is on the bottom of the box.

Share this comment


Link to comment
Share on other sites

Tried putting this on my parents ATV600, nothing but problems. First it took a hand full of times just to get it to install because it would freeze in the middle of the installation. Once I finally got it to install it would freeze if I tried plugging in a USB hard drive also it would freeze if I was using my KR301 remote to navigate the app page.

Share this comment


Link to comment
Share on other sites

I found if you do a fresh factory reinstall ( factory firmware, pinhole, ect)  then do the upgrade the 5.1 fw will work fine.  does run slower but it is a better than buy a new box in some cases.  

Share this comment


Link to comment
Share on other sites
9 hours ago, Pc Shop Sudbury said:

I found if you do a fresh factory reinstall ( factory firmware, pinhole, ect)  then do the upgrade the 5.1 fw will work fine.  does run slower but it is a better than buy a new box in some cases.  

Ya that's how I got it to install, had to do a factory reset first then it would install but it would still freeze when I plugged in a usb hard drive to watch videos or if I was trying to scroll the app page intermittently.

Edited by bkwashby

Share this comment


Link to comment
Share on other sites
On 12/10/2017 at 6:48 PM, bkwashby said:

Ya that's how I got it to install, had to do a factory reset first then it would install but it would still freeze when I plugged in a usb hard drive to watch videos or if I was trying to scroll the app page intermittently.

all else fails go back to android 4.4 and use mygica media center to replace kodi in some cases you have to manually update repos but still works like a charm

Share this comment


Link to comment
Share on other sites

Hi there, I've tried this update with my ATV 586 and it works just fine,  but I'm trying to install Android TV apps with no success. Youtube works perfectly, but Netflix and Spotify refuse to load, for example. Wifi works, as I can download and install them from the MyGica Store. I searched for support on the app developers, but they all told me It's a device issue. Is there a workaround for this? The mobile apps work, but the remote is useless with those. 

Share this comment


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...