Jump to content

Archived

This topic is now archived and is closed to further replies.

Justin

ATV 1900AC/1800/582/380 Android 5.1 Beta Firmware - 07/08/16

Recommended Posts

Here is Beta Firmware to upgrade your ATV 1900AC/1800/582/380 to Android 5.1

You can install this normally using an SD Card or USB drive and the pre installed upgrade app.

This does not require the reset button like before, however if you would like too you can load this through the Recovery Menu as well.

Just extract the IMG file from the zip folder and move it onto a USB drive or SD Card that is formatted to FAT32.

**PLEASE NOTE THIS WILL FACTORY RESET YOUR DEVICE**

- This is our MyGica version of Android 5.1 and not Android Stock version like we offered before. This has been worked on for awhile now.

- I have tested Wifi and Ethernet on all of the above models and it works without issues like before

- This has been running well so far with very minimal issues

- Volume issue has been fixed

- Tried H,265 1080P Blu Ray files in KODI 16.1 and VLC without any issues

- Tried 5.1 Audio within KODI without issues. Tried 5.1 Audio within VLC without issues, just had to switch the audio coded to OPEN-GL.

- No Playstore issues

- Tried Google Play movies and TV shows without any issues. They will show up within You Tube app as well, as long as your logged into the Play Store. HD Playback though I find is ON and OFF, I even have issues with HD Playback on a PC using Google Play Movies Chrome Extension.

- Added full remote support

- One thing that is missing but will be added later is the power/memory buttons at the bottom of the launcher, Power/Standby menu when holding down the power button on the remote.

FEEDBACK CAN BE LEFT HERE:

viewtopic.php?f=149&t=4562

update_MyGica_ATV1900AC_5.1_20160706.zip

Share this post


Link to post
Share on other sites

How to process the steps:

1. Download the file
2. Unzip 
3. Format your MicroSD Card to FAT32
4. Drag and drop files from Unzip folder to root of your MicroSD card
5. Hook it up to your ATV1900AC
6. Connect HDMI, turn TV on
7. Hold pin where Reset is
8. Hookup power while holding down Reset, via pin
9. Hold for 15 seconds

Share this post


Link to post
Share on other sites

Here is a boot file for ATV1800E  Beta 5.1 

How to process the steps:

1. Download the file
2. Unzip 
3. Format your MicroSD Card to FAT32
4. Drag and drop files from Unzip folder to root of your MicroSD card
5. Hook it up to your ATV1900AC
6. Connect HDMI, turn TV on
7. Hold pin where Reset is
8. Hookup power while holding down Reset, via pin
9. Hold for 15 seconds

 

1800E_5.1_Beta_Bootcard.zip

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...