Jump to content

Archived

This topic is now archived and is closed to further replies.

Carina

Mygiga 1900pro

Recommended Posts

Mygiga 1900pro

Box connected to TV via USB. Back light stays red. Booted and got to lollipop. Screen went black. Does not want to boot again. No way of updating firmware. How do I get it to boot? 

Share this post


Link to post
Share on other sites

Hook the box up to the TV via HDMI cable.  Try to do a reset by depressing the back reset button (with a tooth pick) then applying power to the box while still depressing reset till you see the android and release.  Let it go back to default.  If that doesnt work go to the download section and install the firmware from the download section here in forum and follow those instructions.  Sdcard is the only way to reinstall firmware and you must follow those instructions exactly.

Share this post


Link to post
Share on other sites

Well, you should be able to download the file, but yes you need a pc/laptop and an SDcard to do the firmware install.  As per instructions it does work, have done it many a time.  The whole key is the SDcard formatted to Fat32, and all the files from the firmware download in the root of the SDcard.  What it basically does when you do a firmware install, with the reset and power applied for restart, it reads the files on the SDcard and installs the firmware.  It forces the box on reboot to read the image file there, no different than if you were to install different firmware to your phone, same concept other than the SDcard.  Only option for you would be to get someone with a pc/laptop to create the SDcard and put those files on the card.

Not much else I can suggest..sorry.

Share this post


Link to post
Share on other sites

×
×
  • Create New...