MyGica AVT582 - Update microSd card

[napalmek 0]

I download new firmware from http://www.mygica.es/descargas.php for my MyGica AVT582.

I update tv box from microSD, when system updating has been disconnected power cord. Device can't now turn on and can't run recovery mode. Device restarts repeatedly. Is there any way to repair ?

[kicsrules 0]

i think you have a bricked device, try resetting it through the reset pin/button

[Justin 206]

I download new firmware from http://www.mygica.es/descargas.php for my MyGica AVT582.

I update tv box from microSD, when system updating has been disconnected power cord. Device can't now turn on and can't run recovery mode. Device restarts repeatedly. Is there any way to repair ?

When upgrading the unit this way, if power is disconnected, there is a very good chance your unit will become bricked.

You will have to get the unit replaced under warranty.

[napalmek 0]

What I need is a complete ROM img MyGIca AVT 582 I have a software Amlogic S802 USB Burning Tool v2.0.0.1, but I only have OTA update (update from microSD) and the softtware can not take update OTA .

[Justin 206]

What I need is a complete ROM img MyGIca AVT 582 I have a software Amlogic S802 USB Burning Tool v2.0.0.1, but I only have OTA update (update from microSD) and the softtware can not take update OTA .

Sorry but we do not have this

[GillyBilly 0]

Update went well but it still freezes in Android so i returned it to the store to look into that. Anyone suggestions?

[Justin 206]

Update went well but it still freezes in Android so i returned it to the store to look into that. Anyone suggestions?

We are having a lot of mixed feedback from customers on units, we will keep coming out with new updates to fix any problems we find, and are brought to our attention from customers.

Request the unit be exchange for a new one, with the current update

See if that fixes your problem for now.

[GillyBilly 0]

Well i did the updates and it worked more Smoothly but it still freezes.

It also doesn't remember developers settings anymore, like background process minimizing to 1.

Sometimes hdni signal is jumping.

I think the main issue is the high amount of ram memory use , that is causing the freeze i guess

[webmaniac 0]

I vent mine by keep it off surface I use water bottle caps

if left flat it gets to hot causes issues

lifted up runs perfect

give that a try and see if that fixes your freezing problem

[Justin 206]

I vent mine by keep it off surface I use water bottle caps

if left flat it gets to hot causes issues

lifted up runs perfect

give that a try and see if that fixes your freezing problem

I will pass along these problems all of you are mentioning in regards to freezing.

[GillyBilly 0]

Thanks i will try that when it, s returned from shop again

[Justin 206]

Just released a new Kernel Update file

Can be found here: viewtopic.php?f=74&t=1635

Fixes the following:

- Fixes the heating issue some people have been having

- Faster and more stable OS

- OS should no longer freeze

- Fixed Audio/Video freezing