bricked mygica 1900

[Hexe 0]

just before i left on vacation an update partially applied to my box but left it bricked, saying it can't mount / misc. i tried a restore but it left me in recovery console. i've even tried a manual restore using the 5.1 beta firmware but can't get the box to boot from the sd card.

now i'm stuck in recovery console and can't do anything. i've tried every option listed in the recovery screen.

[awestchester 0]

We are also dealing with the same issue. Really hope someone can provide some guidance on how to fix it.

[Justin 206]

You can try this

I have been uploading all my zip files of factory restore cards onto my onedrive. I keep them updated for the most part and I will keep putting them up until they are all there.

http://bit.ly/mygicafiles

If you have any problem downloading them, or you need different files, let me know.

You can also give out this link to customers who need these same files.

quad core video;

the 585, 582, the reset button is on the bottom.

1900 is on the back of the unit

[Hexe 0]

thx Justin.

can't create the recovery sd correctly, "dd" wasn't included in the zip package.

running uboot_MX.cmd only returns line that "dd" is not a recognized program.

[Hexe 0]

determined my micro-sd had too much storage (64 GB) and was formatted with extfat. after switching to a 32 GB card and ensuring fat32 format, was able to recover from micro-sd. thx for the help.

[Justin 206]

Good to hear

Let me know if you have any other questions or run into anymore problems.