Justin 206 Report post Posted January 28, 2016 Hola Justin, la capturadora de un momento a otro dejó de funcionar, con este firmware, pude volver a usarla, pero se presentó un problema, resulta que antes capturaba con una velocidad de 18 Mbps, despues de instalar la actualización, solamente lo hace a 10 Mbps; y los resultados son malos. Necesito poder volver a capturar en 18 Mbps puesto que es la calidad necesaria para mi canal y página, de no ser posible, tendré que cambiar de capturadora; espero una pronta respuesta. Saludos. Angel This will bring you to 18mbps Instructions are included in Zip Folder HD CAPX Firmware- Jan-28-16.zip Quote Share this post Link to post Share on other sites
angelush 0 Report post Posted January 29, 2016 Hi Justin , firmware works perfect , thank you very much for everything and to Laitan I tell him my way I like, stop recording and the lights went out ; at that time I had connected the HDMI cable and the component video while connected only left I was using at the time and the problem was solved . Hope helps, and again Justin , thanks for management . Quote Share this post Link to post Share on other sites
Dark_Sephirus 0 Report post Posted February 1, 2016 I update the firmware with the last firmware posted here but now the HD Cap X doesn't capture if i use the terminal/component cable from ps3, when i put to record the Mygica HD Cap reboot after 5 seconds ... there's any solution for this problem ? Quote Share this post Link to post Share on other sites
sbenrap 0 Report post Posted February 17, 2016 My MyGica HD CAP X keeps creating files with no audio or 0 byte files. I tried to update but the red 'Rec' led does not turn on and the file jedi.img does not delete from Hard Drive (tried also various disk-on-key - same result). My Serial Number is - 201409160098 is the firmware not compatible with my version? Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted September 27, 2016 Hola Justin, la capturadora de un momento a otro dejó de funcionar, con este firmware, pude volver a usarla, pero se presentó un problema, resulta que antes capturaba con una velocidad de 18 Mbps, despues de instalar la actualización, solamente lo hace a 10 Mbps; y los resultados son malos. Necesito poder volver a capturar en 18 Mbps puesto que es la calidad necesaria para mi canal y página, de no ser posible, tendré que cambiar de capturadora; espero una pronta respuesta. Saludos. Angel This will bring you to 18mbps Instructions are included in Zip Folder Video OK, Leds OK but after this firmware, i cant Record. I pressed many time the REC button and nothing happens. Ive tried with "NEW HDCAPX FIRMWARE" too and same problem. Can you, Justin, send me the original or factory firmware? Quote Share this post Link to post Share on other sites
zxl 12 Report post Posted September 28, 2016 You can try following FW Download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Here are some steps: 1.copy firmware file jedi.img to usb disk 2.plug on usb disk to HDCAP X 3.power on HDCAP X 4.Rec LED will blink few second during flashing rom 5.power off and power on HDCAP new firmware will take effect! Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted September 28, 2016 You can try following FW Download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Here are some steps: 1.copy firmware file jedi.img to usb disk 2.plug on usb disk to HDCAP X 3.power on HDCAP X 4.Rec LED will blink few second during flashing rom 5.power off and power on HDCAP new firmware will take effect! It seems be the same firmware posted here earlier called "NEW HDCAPX FIRMWARE.zip". But im gonna try use this one and reply here. Thanks! Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted September 28, 2016 You can try following FW Download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Here are some steps: 1.copy firmware file jedi.img to usb disk 2.plug on usb disk to HDCAP X 3.power on HDCAP X 4.Rec LED will blink few second during flashing rom 5.power off and power on HDCAP new firmware will take effect! Got no luck, I cant Rec. My HD Cap is now useless =/ My serial number is MHDX1603333. This serial could help in anything? YCbCr and CVBS OK, tested right now (and with 20mbps). But now with HDMI, no luck. I'm trying to record my tv decoder, before it was possible (my last recording of this equipment was "Encode_1080P_157" here at 10mbps). Same pendrive, same cables.... Is there another firmware different of these 2? Quote Share this post Link to post Share on other sites
zxl 12 Report post Posted September 29, 2016 Hi, try to test following Firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted September 29, 2016 Hi, try to test following Firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ zxl, thanks for fast reply but ive tried this firmware about 5 times (both versions: zxl and Justin uploads) =/ Quote Share this post Link to post Share on other sites
zxl 12 Report post Posted September 30, 2016 Please try this firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted September 30, 2016 Please try this firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ zxl, thanks for fast reply. One more time, i downloaded by your link from mega.nz and tried to upgrade my MyGica. The process was ok but same problem of no recording hdmi input. Is there another way to solve it? Quote Share this post Link to post Share on other sites
Justin 206 Report post Posted October 3, 2016 Please try this firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ zxl, thanks for fast reply. One more time, i downloaded by your link from mega.nz and tried to upgrade my MyGica. The process was ok but same problem of no recording hdmi input. Is there another way to solve it? Please give ZXL till Oct 8th to respond, as our China Office is on Holidays from Oct 1-7 Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted October 3, 2016 Please try this firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ zxl, thanks for fast reply. One more time, i downloaded by your link from mega.nz and tried to upgrade my MyGica. The process was ok but same problem of no recording hdmi input. Is there another way to solve it? Please give ZXL till Oct 8th to respond, as our China Office is on Holidays from Oct 1-7 Thanks justin. Ill wait till Oct 8th =) Quote Share this post Link to post Share on other sites
zxl 12 Report post Posted October 8, 2016 How about this Firmware download link: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted October 10, 2016 How about this Firmware download link:https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA ... d94KgrMiJQ Sorry, zxl, but are you reading my answers??? This is the third time that you send me the same link and i tried this one a hundred times without success. Quote Share this post Link to post Share on other sites
GugaVTW 0 Report post Posted October 11, 2016 THANK YOU SO MUCH! My HD Cap X is now working after this update. I got that problem with only green light appearing and no HDMI input and now it's working, THANKS! (Sorry for bad English) Quote Share this post Link to post Share on other sites
glutamalto 0 Report post Posted October 12, 2016 I gave up hope. Bye. Quote Share this post Link to post Share on other sites
Betosuamos 0 Report post Posted November 1, 2016 A week ago bought the Mygica Full HD Video Capture BOX and prove I had the following problems: 1- When I capture videos that are recorded in VHS format, using composite video connections (inputs: yellow, red and white), the recording stops repeatedly with any imperfection of the VHS tape source. 2- The video display connected to the HDMI output screen TV, also is interrupted repeatedly.It is impossible to see the original video 3- TheH264 files (720P) HD Video Converter created by MyGica HD Cap X Full HD Box from VHS tapes are corrupted by the following Do not allow rewind or fast forward - "freezes" the image. Not allow you to view the duration of the video The videos are shown as having sizes up to 1TB video viewers as Quicktime, Windows Media player , VLC media player or MPC-HC x64 are locked and stop working when it comes to reproduce files created 4- The sound of H.264 video clips recorded on the USB is very low compared to the original video After detecting the malfunction of HD Video Converter Chapter X, I firmware upgrade using the version Posted November 24, 2015 http://mygicasupport.com/index.php?/topic/1863-firmware-hd-cap-x/ I tested again after updating the firmware and new H.264 files created from VHS tapes, they are also corrupt. Post these same problems on the website of Mygica but so far not received response Please assistance to solve this problem Quote Share this post Link to post Share on other sites
zxl 12 Report post Posted November 2, 2016 Here are latest firmware download link of HDCap X: https://mega.nz/#!3AoTCbaS!5SIwKd-fgHoA-yUBoi7Hd5UIQbJS-CTrLd94KgrMiJQ And, upgrade instructions: 1、The jedi.img files are copied to the root directory of U disk 2、The U disk is inserted into the USB interface of HDCapX 3、Re plug the power, the system will automatically find the upgrade file to update the firmware 4、During the upgrade process, Rec LED will flash 3-5 seconds, after the upgrade is complete, the system will automatically restart 5、The system firmware upgrade is complete U disk jedi.img will automatically delete. Quote Share this post Link to post Share on other sites
Ale 0 Report post Posted December 21, 2016 Hello good morning, you have idea why the mygica hd cap x turns on the green light of the power, because the plug in and that single light goes on, has a solution? Quote Share this post Link to post Share on other sites
douglas 0 Report post Posted January 14, 2017 Good morning, I added my board to 3 days, I recorded a video test and realized that, at a certain moment, the audio hangs, and the video delays the voice, do these updates solve my problem? Quote Share this post Link to post Share on other sites
grocha 0 Report post Posted February 6, 2017 Hi Justin, Could you please post the new Firmware (most updated version) download link? Thanks in advance, Glaucio Quote Share this post Link to post Share on other sites
Rafael Fongozi 1 Report post Posted June 11, 2017 Hello guys, My Hd cap X is generating a blank video file when it creates the second file for the same record after the first 2gb file is created. This is pissing me off as hits happens every time I try to use it and it is just brand new. 1 Quote Share this post Link to post Share on other sites
fer424 1 Report post Posted June 27, 2017 Good morning, there exists some firmware that allows to input video format PAL in the CVBS in? My HD Cap accepts any format entering trough HDMI or YPbPr, but if revenue PAL format trough CVBS, records it in black and white (with NTSC works fine). And my equipments have exits only PAL (I am in Argentina). Thanks for any reply 1 Quote Share this post Link to post Share on other sites